Error Code 1432 - Accelerator Pedal Circuit Failure - Continued

Error Code 1432 - Accelerator Pedal Circuit Failure - Continued - TM-10-3930-675-20-1_216

Table 5. Error Code 1551 - Idle Validation Switch Circuit Failure Troubleshooting Procedures

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
189

TM 10-3930-675-20-1 0008 00-25 ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED 0008 00 Table 4. Error Code 1432 - Accelerator Pedal Circuit Failure Troubleshooting Procedures. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1432 - Accelerator Pedal Circuit Failure - Continued 5. Place ignition switch in OFF position, disconnect harness from throttle position sensor, and disconnect OEM harness connector from engine ECU. a. Measure resistance from OEM harness connector pin 47 to all other pins in connector. Resistance should be greater than 100k ohms. If harness requires replacement, notify SRA. b. Measure resistance from OEM harness connector pin 48 to all other pins in connector. Resistance should be greater than 100k ohms. If harness requires replacement, notify SRA. c. Measure resistance from OEM harness connector pin 49 to all other pins in connector. Resistance should be greater than 100k ohms. If harness requires replacement, notify SRA. >100K OHMS

Privacy Statement
Press Release
Contact