TM 10-3930-675-20-1
0019 00-2
ENGINE OIL PRESSURE SENSOR TROUBLESHOOTING - CONTINUED
0019 00
Table 1. Error Code 1135 - Oil Pressure Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1135 - Oil Pressure Sensor Circuit
Failure - Continued
2. Install
breakout
cable
between sensor and engine
harness
connector.
Place
ignition
switch
in
ON
position.
3. Measure supply voltage from
pin A (or RED) to pin B (or
BLACK) of breakout cable.
Voltage should be 4.75-
5.25V.
If voltage is not as specified,
proceed to step 4.
4. Disconnect sensor harness
connector from engine ECU.
Place ignition switch in ON
position.
4.75-5.25V
