Error Code 1597 - Voltage Monitor, Low Voltage Failure - Cont

Error Code 1597 - Voltage Monitor, Low Voltage Failure - Cont - TM-10-3930-675-20-1_441

Error Code 1597 - Voltage Monitor, Low Voltage Failure - Cont - TM-10-3930-675-20-1_443

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
405

TM 10-3930-675-20-1 0025 00-22 ENGINE BATTERY VOLTAGE CIRCUITS TROUBLESHOOTING - CONTINUED 0025 00 Table 6. Error Code 1597 - Voltage Monitor, Low Voltage Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1597 - Voltage Monitor, Low Voltage Failure - Continued 6. Place ignition switch in OFF position and disconnect OEM harness from engine ECU (794). Perform the following resistance checks. If resistance is not as specified, replace battery cables (WP 0108 00). a. Measure resistance from harness connector pin 7 to positive (+) battery terminal. Resistance should be less than 10 ohms. b. Measure resistance from harness connector pin 8 to positive (+) battery terminal. Resistance should be less than 10 ohms. c. Measure resistance from harness connector pin 17 to positive (+) battery terminal. Resistance should be less than 10 ohms. d. Measure resistance from harness connector pin 18 to positive (+) battery terminal. Resistance should be less than 10 ohms. <10 OHMS USE TEST LEAD KIT P/N 3822758

Privacy Statement
Press Release
Contact