TM 10-3930-675-20-1 0006 00-4 TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED 0006 00 Table 1. Engine Troubleshooting Procedures (Non-Error Code) - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 11. Engine Starts But Will Not Keep Running - Continued. 4.  Check for restricted or damaged air intake and exhaust    hoses,    lines,    and clamps. Tighten  or  repair  air  intake  or exhaust hoses, lines, and clamps (WP 0057 00 and WP 0062 00). 12.  Engine Vibration Excessive. 1.  Observe  if  engine  is  running rough. Refer to engine troubleshooting. 2.  Check  for  loose  or  damaged engine mounts. a.  Tighten loose engine mounts. b.  Notify   DS   Maintenance   if engine mounts are damaged. 3.  Check  for  loose  or  damaged engine vibration damper. a.  Tighten loose engine vibration damper. b.  Notify   DS   Maintenance   if engine   vibration   damper   is damaged. 13.  Fuel Consumption Excessive. 1.  Check  for  loose,  leaking,  or damaged fuel lines, hoses, and fittings. Tighten,  repair,  or  replace  fuel system lines, hoses, and fittings (WP 0059 00). 2.  Check for dirty or clogged air cleaner element. Service   or   replace   air   cleaner element (WP 0056 00). 14.  Engine Overheats. 1.  Check    cooling    system    for loose or damaged hoses, lines, and clamps. Tighten or repair cooling system hoses, lines or clamps (WP 0064 00). 2.  Visually check radiator assembly for signs of leakage or damage. If radiator is leaking or damaged, notify DS Maintenance. 3.  Remove engine thermostat. Replace  engine  thermostat  (WP 0066 00). 15.  Engine Oil Pressure - Low. 1.  Check engine oil level. Fill engine oil to the correct level (LO 10-3930-675-12). 2.  Visually   check   for   external engine oil leaks. Tighten leaking lines or fittings. 3.  Check if     engine     oil     is contaminated or does not meet specification for current operating conditions. Replace engine oil and filter (LO 10-3930-675-12).