TM 10-3930-675-20-1
0006 00-5
TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
0006 00
Table 1. Engine Troubleshooting Procedures (Non-Error Code) - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
16. Engine Oil Pressure - High.
Check
if
engine
oil
is
contaminated or does not meet
specification
for
current
operating conditions.
Replace engine oil and filter (LO
10-3930-675-12).
17. Engine Cold Start System Not Working.
1. Ensure circuit breaker no.17 is
not tripped.
Reset circuit breaker (see WP
0073 00).
2. Remove engine cover and
check cold start ether canister.
Replace
empty
or
missing
canister (see WP 0060 00).
3. Perform continuity check of
cold start rocker switch.
Replace rocker switch if faulty
(see WP 0072 00).
4. Check ether supply tube for
damage between cold start
activation solenoid and engine
intake.
Replace damaged tube (see WP
0060 00).
5. Perform voltage check of cold
start
activation
solenoid
mounted on starter relay
mounting bracket.
Replace shorted or damaged
solenoid. (see WP 0060 00).
