TM 10-3930-675-20-10006 00-7TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED0006 00Table 2. Electrical Troubleshooting Procedures (Non-Error Code) - Continued.MALFUNCTIONTEST OR INSPECTIONCORRECTIVE ACTION3. Front/Rear Side Marker Light(s) Do NotOperate When Headlight Switch is Turned On- Continued.2. Inspect marker lights fordamage and burned out lamps.a. Replace burned out lamps(WP 0085 00).b. Replace damaged markerlight (WP 0085 00).3. Inspect marker lights, wiringharnesses, and connectors fordamage, continuity, andproper voltage (WP 0199 00-41).Repair or replace damaged wiresor connectors (WP 0111 00).4. Taillight(s) Do Not Operate When HeadlightSwitch is Turned On.1. Ensure that taillight and sidemarker light circuit breakernumbers 22 and 23 are nottripped.Reset circuit breakers as required(WP 0073 00).2. Inspect taillights for damageand burned out lamps.Replace burned out lamps (WP0085 00).3. Inspect taillight wiring harnessand connectors for damage,continuity, and proper voltage(24V).Repair or replace damaged wiresor connectors (WP 0111 00).5. Stoplight(s) Do Not Operate When BrakePedal (s) is Pressed.1. Check position of blackoutdrive/marker light switch.Place blackout drive/marker lightswitch in OFF position.2. Ensure that brake light circuitbreaker numbers 03 and 10 arenot tripped.Reset circuit breakers as required(WP 0073 00).3. Ensure blackout light circuitbreaker number 24 is nottripped.Reset circuit breaker as required(WP 0073 00).4. Inspect stoplights for damageand burned out lamps.Replace burned out lamps (WP0085 00).5. Inspect stoplight wiringharness and connectors fordamage, continuity, andproper voltage.Repair or replace damaged wiresor connectors (WP 0111 00).6. Remove stoplight relaynumbers 3010 (RL5), 3015R,and 3015L and check forshorted and damaged relay.Replace shorted or damagedrelay (WP 0073 00).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business