TM 10-3930-675-20-2
0072 00-3
INSTRUMENT PANEL SWITCHES, GAGES, AND PANEL LAMPS
REPLACEMENT - CONTINUED
0072 00
ROCKER SWITCH INSTALLATION
1.
Push switch (5) down into switch/gage panel (1) until flush with panel.
2.
To install switch lamp, refer to Instrument Panel Lamp Installation.
3.
Connect instrument panel wiring harness connector (4) to switch (5).
4.
Install switch/gage panel (1) to instrument panel (2) with ten screws (3).
ROTARY SWITCH REMOVAL
1.
Remove ten screws (3) from switch/gage panel (1).
2.
Lift switch/gage panel (1) upward from instrument panel (2).
3.
Remove six screws (8) and washers (9) of instrument panel (2) to gain access to switches (7).
4.
Remove three screws (6) to separate switch plate (10) from instrument panel (2) and pull switch plate downward for
access to switches (7).
6
2
7
8,9
10
