TM 10-3930-675-20-2
0115 00-7
TRANSMISSION OIL, OIL FILTERS, AND OIL FILTER HEAD
REPLACEMENT - CONTINUED
0115 00
TRANSMISSION INTERNAL COARSE OIL FILTER INSTALLATION
1.
Install new o-ring (20) in cover (18).
2.
Coat gasket sealing surface of oil filter (19) with lubricating oil and install in transmission.
3.
Screw in oil filter (19) by hand until contact with sealing surface is obtained. Tighten by hand and additional 1/3 to 1/2
turn.
4.
Install cover (18) with three washers (17) and screws (16). Tighten screws to 203 lb-in (23 Nm).
END OF WORK PACKAGE