HYDRAULIC SYSTEM OIL SAMPLING VALVE HOSE REMOVAL

TRANSMISSION OIL SAMPLING VALVE HOSE REMOVAL - TM-10-3930-675-20-2_50

FUEL SOLENOID SHUTOFF VALVE REPLACEMENT - TM-10-3930-675-20-2_53

TM-10-3930-675-20-2 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
23

TM 10-3930-675-20-2 0054 00-5 OIL SAMPLING VALVES AND HOSES REPLACEMENT - CONTINUED 0054 00 HYDRAULIC SYSTEM OIL SAMPLING VALVE HOSE REMOVAL NOTE Tag and trace routing of oil sampling valve hose prior to disconnecting. 1. Move cab to transport position (TM 10-3930-675-10). 2. Remove tiedown straps and clamps as necessary. Discard tiedown straps. 3. Disconnect hose from oil sampling valve fitting and hydraulic control valve fitting. Remove hose. 4. Remove hydraulic control valve fitting. HYDRAULIC SYSTEM OIL SAMPLING VALVE HOSE INSTALLATION 1. Install hydraulic control valve fitting. 2. Connect hose to hydraulic control valve fitting and route to oil sampling valve. 3. Connect hose to oil sampling valve fitting and secure hose with new tiedown straps and clamps as necessary. 4. Start engine (TM 10-3930-675-10) and check hose for oil leaks. 5. Return cab to operation position (TM 10-3930-675-10). 6. Install engine cover (WP 0143 00). END OF WORK PACKAGE HYDRAULIC SYSTEM OIL SAMPLING VALVE HOSE INNER SURFACE OF RIGHT FRAME MAIN CONTROL VALVE FORWARD

Privacy Statement
Press Release
Contact