OIL SAMPLING VALVE REMOVAL

OIL SAMPLING VALVES AND HOSES REPLACEMENT - TM-10-3930-675-20-2_47

ENGINE OIL SAMPLING VALVE HOSE INSTALLATION - TM-10-3930-675-20-2_49

TM-10-3930-675-20-2 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
20

TM 10-3930-675-20-2 0054 00-2 OIL SAMPLING VALVES AND HOSES REPLACEMENT - CONTINUED 0054 00 OIL SAMPLING VALVE REMOVAL - CONTINUED 1. Hold fitting jam nut in place and disconnect engine oil sampling valve from fitting. 2. Cap fitting with protective cap. OIL SAMPLING VALVE INSTALLATION 1. Remove protective cap and install oil sampling valve. 2. Start engine (TM 10-3930-675-10) and check for oil leaks. ENGINE OIL SAMPLING VALVE HOSE REMOVAL NOTE Tag and trace routing of oil sampling valve hose prior to disconnecting. 1. Remove tiedown straps and clamps as necessary. Discard tiedown straps. 2. Disconnect hose from oil sampling valve fitting and engine fitting. Remove hose. 3. Remove engine fitting. ENGINE OIL SAMPLING VALVE TRANSMISSION OIL SAMPLING VALVE HYDRAULIC SYSTEM OIL SAMPLING VALVE

Privacy Statement
Press Release
Contact