TM 10-3930-675-20-2
0054 00-4
OIL SAMPLING VALVES AND HOSES REPLACEMENT - CONTINUED
0054 00
TRANSMISSION OIL SAMPLING VALVE HOSE REMOVAL
NOTE
Tag and trace routing of oil sampling valve hose prior to disconnecting.
1.
Move cab to transport position (TM 10-3930-675-10).
2.
Remove tiedown straps and clamps as necessary. Discard tiedown straps.
3.
Disconnect hose from oil sampling valve fitting and transmission fitting. Remove hose.
4.
Remove transmission fitting.
TRANSMISSION OIL SAMPLING VALVE HOSE INSTALLATION
1.
Install transmission fitting.
2.
Connect hose to transmission fitting and route to oil sampling valve.
3.
Connect hose to oil sampling valve fitting and secure hose with new tiedown straps and clamps as necessary.
4.
Start engine (TM 10-3930-675-10) and check hose for oil leaks.
5.
Return cab to operational position (TM 10-6930-675-10).
6.
Install engine cover (WP 0143 00).
TRANSMISSION
OIL SAMPLING
VALVE HOSE