TM 10-3930-675-20-2
0058 00-2
FUEL FILTER/WATER SEPARATOR REPLACEMENT - CONTINUED
0058 00
REMOVAL - CONTINUED
3.
Remove threaded adapter seal ring from fuel pump (1). Discard seal ring.
INSTALLATION
NOTE
Ensure fuel pump sealing surface is clean and free from old gasket material
1.
Install new threaded adapter seal ring, provided with new fuel filter, on fuel pump (1).
NOTE
Apply a light coat of lubricating oil to new filter gasket and fill fuel filter with correct fuel.
2.
Install new fuel filter (2) on fuel pump (1) and tighten until gasket contacts filter pump surface.
CAUTION
Overtightening of filter can distort threads and damage fuel filter seal.
3.
Tighten fuel filter (2) an additional ½ to ¾ turn.
4.
Start engine and check for leaks (TM 10-3930-675-10).
END OF WORK PACKAGE
1
2
