TM 10-3930-675-20-2
0183 00-1
HYDRAULIC SYSTEM OIL FILTERS REPLACEMENT
0183 00
THIS WORK PACKAGE COVERS
Hydraulic Reservoir Return Oil Filter: Removal, Instal-
lation
Hydraulic Reservoir Breather Filter: Removal, Installa-
tion
Hydraulic System In-Line Filters and Filter Head:
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 31, WP 0204 00)
Pan, drain (Item 20, WP 0204 00)
Wrench, strap, oil filter (Item 38, WP 0204 00)
Wrench, torque, 15-75 lb-ft capacity (Item 42, WP
0204 00)
Materials/Parts
Compound, sealing, pipe (Item 10, WP 0203 00)
Oil, lubricating (Item 19, WP 0203 00)
Rag, wiping (Item 22, WP 0203 00)
Tag, marker (Item 28, WP 0203 00)
Filter, breather (P/N 920130.009) (2)
Materials/Parts - Continued
Filter return, insert (P/N 923110.0668) (2)
Filter, insert (P/N 921689.0009)
Filter, insert (P/N 923071.0002) (2)
Filter, insert (P/N 923071.0001)
References
LO 10-3930-675-12
TM 10-3930-675-10
WP 0102 00
Equipment Condition
Wheels chocked
Steering and brake hydraulic system pressure relieved
(WP 0164 00)
WARNING
•
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pressure
has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid under
pressure can penetrate the skin, causing serious injury.
•
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an acci-
dent occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed
within a few hours or gangrene may result.
•
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing hydraulic
system oil filters. Failure to do so could result in injury.
•
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may
result in injury to personnel.
CAUTION
Wipe filter and surrounding area clean prior to removal. After filter removal, immediately install replace-
ment filter or cover area with a clean rag. Contaminated hydraulic system could cause equipment failure.
