TM 10-3930-675-20-2
0183 00-5
HYDRAULIC SYSTEM OIL FILTERS REPLACEMENT - CONTINUED
0183 00
HYDRAULIC SYSTEM IN-LINE FILTERS AND FILTER HEAD REMOVAL - CONTINUED
HYDRAULIC SYSTEM IN-LINE FILTERS AND FILTER HEAD INSTALLATION
1.
Install sensor to filter head (WP 0102 00).
2.
Install filter head (12) to bracket (13) with two washers (15) and screws (14).
3.
Connect fittings and hydraulic hoses to filter head (12).
NOTE
New o-ring comes packed with new filter element.
4.
Lubricate new o-ring (16) with lubricating oil.
5.
Clean filter bowl (18).
6.
Insert new filter element (17) in filter bowl (18).
7.
Place o-ring (16) between filter head (12) and filter bowl (18) and install filter bowl to filter head by rotating bowl
clockwise.
8.
Open any ball valve at hydraulic reservoir that was closed.
9.
Check oil level in hydraulic reservoir (LO 10-3930-675-12).
10.
Start engine (TM 10-3930-675-10) and check for leaks.
END OF WORK PACKAGE
12
13
14,15
16
17
18
18
17
12
14,15
16
13
19
