TM 10-3930-675-20-2
0183 00-2
HYDRAULIC SYSTEM OIL FILTERS REPLACEMENT - CONTINUED
0183 00
HYDRAULIC RESERVOIR RETURN OIL FILTER REMOVAL
NOTE
Hydraulic reservoir has two return oil filters. Each is removed the same way.
1.
Clean area at top of hydraulic reservoir (2).
WARNING
Plate is under spring tension. Use care when removing final screws. Failure to follow this warning may
result in injury to personnel.
2.
Remove eight screws (4), washers (5), and plate (1) from top of hydraulic reservoir (2).
3.
If damaged, remove o-ring (3) from hydraulic reservoir (2). Discard o-ring.
4.
Lift oil filter housing (6) out from hydraulic reservoir (2).
5.
From bottom of oil filter housing (6), remove screw (10), washer (9), and o-ring (8).
6.
Remove oil filter insert (7) from oil filter housing (6). Discard oil filter insert.
1
2
3
4,5
