TM 10-3930-675-20-2
0183 00-3
HYDRAULIC SYSTEM OIL FILTERS REPLACEMENT - CONTINUED
0183 00
HYDRAULIC RESERVOIR RETURN OIL FILTER REMOVAL - CONTINUED
HYDRAULIC RESERVOIR RETURN OIL FILTER INSTALLATION
1.
Clean oil filter housing (6).
2.
Place new oil filter insert (7) into oil filter housing (6).
3.
Install o-ring (8), washer (9), and screw (10).
4.
Position oil filter housing (6) into hydraulic reservoir (2).
5.
If removed, install new o-ring (3) to hydraulic reservoir (2).
NOTE
Two of eight washers and screws may first be placed on opposite sides of plate, and tightened evenly, to fit
plate to hydraulic reservoir.
6.
Install plate (1) to hydraulic reservoir (2) with eight washers (5) and screws (4). Tighten screws to 27 lb-ft (37 Nm).
7.
Operate vehicle (TM 10-3930-675-10) and check for leaks.
6
7
8
9
10
