TM 10-3930-675-24-1
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0009 00
Table 1. Error Code 1131 - High Voltage Detected at Throttle Position
Sensor Circuit Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1131 - Throttle Position Sensor
Circuit - Continued.
2000-3000 OHMS
PIN 5
X690
1 OR
BK 6
2 GN
RD 5
3 BU
WH 4
PIN 4
USE TEST LEAD KIT P/N 3823994
7. Check resistance on the
a. If resistance is not as specified,
accelerator pedal part of
replace accelerator pedal
connector X690 between pins
assembly (WP 0062 00).
5 and 6. Check each pin for
b. If resistance is as specified,
continuity
to
ground.
check continuity and for
Resistance should be 1,500 to
continuity to ground for wires
3,000 Ohms with the pedal
233, 234, and 235 (WP 0048
released and 250 to 1,500
00-11).
Ohms
with
the
pedal
c. Repair or replace damaged
depressed. There should be
connector (WP 0113 00).
continuity to ground (WP 0048
d. Replace damaged, open,
00-11).
shorted, or grounded X690 to
X23 wiring harness (WP 0113
00).
0009 00-3
