TM 10-3930-675-24-1
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0009 00
Table 1. Error Code 1131 - High Voltage Detected at Throttle Position
Sensor Circuit Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1131 - High Voltage Detected at 12.Check
for
continuity. a. Repair or replace damaged
Throttle Position Sensor Circuit - Continued.
Disconnect connector X16 and
connector (WP 0113 00).
inspect for damage. Check b. Replace any damaged, open, or
continuity and for continuity to
grounded wires.
ground for wires A163, A164,
and A165 (WP 0048 00-11).
13.Check
for
continuity.
If there is continuity between pin
Disconnect the OEM harness
47 and any other pin in the OEM
connector and connector X16.
harness connector, replace the
Check for continuity on the
engine and transmission wiring
OEM
harness
connector
harness (WP 0113 00).
between pin 47 and all of the
other pins in the connector.
There should be continuity
between pins.
434-40015
0009 00-7
