TM 10-3930-675-24-1
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0009 00
Table 2. Error Code 1132 - Low Voltage Detected at Throttle Position Sensor Circuit
Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Throttle Position Sensor Circuit - Continued.
accelerator pedal part of
found, replace accelerator
connector X690 between pin 5
pedal assembly (WP 0062 00).
and ground and pin 6 and b. If continuity to ground is not
ground. There should be
found, check continuity and
for continuity to ground for
00-11).
wires 233, 234, and 235 (WP
c. Repair or replace damaged
connector (WP 0113 00).
d. Replace damaged, open,
shorted, or grounded X690 to
X23 wiring harness (WP 0113
00).
X690
1 OR
BK 6
2 GN
RD 5
WH 4
3 BU
PIN 5 AND
PIN 6
USE TEST LEAD KIT P/N 3823996
0009 00-10