TM 10-3930-675-24-1
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0009 00
Table 2. Error Code 1132 - Low Voltage Detected at Throttle Position
Sensor Circuit Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1132 - Low Voltage Detected at 6. Check
for
continuity. a. If resistance is not as specified;
Throttle Position Sensor Circuit - Continued.
Disconnect connector X690
replace accelerator pedal
and inspect for damage. Check
assembly (WP 0062 00).
resistance on the acceleration b. Repair or replace damaged
pedal part of connector X690
connector (WP 0113 00).
between pins 4 and 5. Check
each pin for continuity to
ground. Resistance should be
2,000 to 3,000 Ohms and there
should not be continuity to
ground (WP 0048 00-11).
2000-3000 OHMS
X690
PIN 4
1 OR
BK 6
2 GN
RD 5
WH 4
3 BU
USE TEST LEAD KIT P/N 3823996
PIN 5
0009 00-9
