TM 10-3930-675-24-1
OVERLOAD PROTECTION TROUBLESHOOTING - CONTINUED
0011 00
Table 5. Error Code 134 - Right Lift Cylinder Pressure Sensor or
Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 134 - Right Lift Cylinder Pressure 5. Disconnect sensor harness a. If no voltage (24V) is found,
Sensor or Circuit Failure - Continued.
768-1 and check voltage (24V)
continue with step 6.
between 1 and 3 with the b. If voltage (24V) is found,
check sensor pins and harness
for damage, seal, and tight fit.
c. Replace damaged sensor and
harness (WP 0102 00).
6. Remove the engine cover to a. If no voltage (24V) is found at
gain access to X167. Check
X167 between pins 16 and 17,
voltage (24V) at X167
between pins 16 and 17 and
check voltage (3 to 6V) b. If no voltage (3 to 6V) is found
between pins 17 and 18 with
at X167 between pins 17 and
9).
9).
c. Replace damaged sensor and
harness (WP 0102 00).
d. Repair or replace damaged
wires or connectors (WP 0113
00).
e. Replace damaged or open
harness (WP 0113 00).
0011 00-8