TM 10-3930-675-24-2
CIRCUIT BREAKERS AND RELAYS REPLACEMENT - CONTINUED
0074 00
50A CIRCUIT BREAKERS REMOVAL
0074 00
1.
Remove engine cover (WP 0148 00).
2.
Disconnect battery cables (WP 0110 00).
NOTE
Tag wires for installation.
3.
Remove protective covers (18) from 50A circuit breaker terminals.
4.
Remove nuts (19), washers (20), and terminal leads (21) from circuit breakers (22).
5.
Remove screws (23), nuts (24), washers (25), and circuit breakers (22) from mounting plate (17).
22,23,
19,20,21
18
24,25
17
50A CIRCUIT BREAKERS INSTALLATION
0074 00
1.
Position 50A circuit breakers (22) on mounting plate (17) and secure with screws (23), nuts (24), and washers (25).
2.
Connect terminal leads (21) to circuit breakers (22) and secure with nuts (19) and washers (20).
3.
Place protective covers (18) over circuit breaker terminals.
4.
Reconnect battery cables (WP 0110 00).
5.
Install engine cover (WP 0148 00).
0074 00-8
