TM 10-3930-675-24-2
TOPHANDLER PROXIMITY SWITCHES REPLACEMENT - CONTINUED
0075 00
TWISTLOCK PROXIMITY SWITCH REMOVAL - CONTINUED
2.
Loosen four screws (6) and remove cover (4) from junction box (5). Inspect rubber seal in groove of cover. Replace only
if damaged.
5
4
6
3.
Loosen cable nut (10) and slide cable nut and grommet (9) back on proximity switch (1) cable.
CAUTION
To avoid damage to junction box, a fine-tipped jeweler's screwdriver should be used when disconnect-
ing proximity switch wires. DO NOT use a punch.
NOTE
Tag wires for installation.
4.
Using a jeweler's screwdriver, disconnect proximity switch wires (8) from terminal blocks (7).
NOTE
Remove cable clamps and tiedown straps as needed. Discard tiedown straps.
5.
Remove proximity switch (1) with cable from tophandler.
7
5
8
1
9
10
0075 00-2
