TM 10-3930-675-24-2
TOPHANDLER PROXIMITY SWITCHES REPLACEMENT - CONTINUED
0075 00
SPREADER BEAM PROXIMITY SWITCH REMOVAL - CONTINUED
5.
Loosen cable nut (27) and slide cable nut and grommet (26) back on proximity switch (17) cable.
CAUTION
To avoid damage to junction box, a fine-tipped jeweler's screwdriver should be used when disconnect-
ing proximity switch wires. DO NOT use a punch.
NOTE
Tag wires for installation.
6.
Using a jeweler's screwdriver, disconnect proximity switch wires (25) from terminal blocks (24).
NOTE
Remove tiedown straps as needed. Discard tiedown straps.
7.
Remove proximity switch (17) with cable from tophandler.
8.
Remove cable cover (28) from proximity switch (17) cable.
23
24
25
26
27
17
28
0075 00-7
