TM 10-3930-675-24-2
STEERING COLUMN SENSOR REPLACEMENT - CONTINUED
0136 00
INSTALLATION
NOTE
Position flange with TOP mark on steering column sensor facing forward with connector in lowest
possible position.
1.
Connect cable connector (12) to steering column sensor (6).
2.
Position steering column sensor (6) in steering column base (13).
3.
Install four screws (10), eight washers (11), and four new locknuts (9).
9,10,11
1
13
6
12
4.
Position metal plate (8), paper gasket (7), and steering column (1) on steering column sensor (6).
5.
Install four washers (4) and screws (3) on steering column (1).
1
3,4
6
7,8
0136 00-3
