TM 10-3930-675-24-2
CAB TRANSPORT LIFT MAINTENANCE - CONTINUED
0138 00
CAB TRANSPORT SYSTEM INSPECTION
1.
In operational position, inspect rail guides (1) for excessive wear or damage.
CAUTION
Excessive clearance between the tapered part of the cab rollers and the taper of the rail guides can
cause binding of cab during cab movement.
2.
Move cab to transport position (TM 10-3930-675-10) and check for smooth movement of cab on rail guides (1). Support
frame assembly (4) and inspect rail guides for excessive wear or damage.
3.
Check cab rollers (2) and locking bars (3) for proper operation, excessive wear, or damage.
Replace cab transport system components, as needed (refer to Cab Transport Lift Removal and Installation).
4.
1
4
434-4105
434-4104
2
3
5.
Inspect and replace, as needed, cab sliding cylinder (WP 0174 00), cab lifting cylinder (WP 0173 00), and/or hydraulic
6.
Return cab to operational position (TM 10-3930-675-10) and fully raise cab transport lift. Check cab transport lift for
height alignment with cab support frame (4).
7.
Visually check alignment of rail guides (1) at tapered edge of rail guides, and alignment between cab transport lift and
cab support frame (4).
NOTE
Each cab lifting cylinder has an adjustable clevis on the rod of cylinder.
0138 00-2