TM 10-3930-675-24-2
AUTOLUBE SYSTEM MAINTENANCE - CONTINUED
0141 00
AUTOLUBE TUBE REMOVAL
1.
Push in quick-disconnect collar (1) to release tube (2).
2.
Remove tube (2) from quick-disconnect collar (1).
NOTE
If removing the tube to identify a "plugged" line, the tube may appear "stiff" when under pres-
sure.
Remove a "plugged" line by loosening quick-disconnect fitting with an open end wrench to relieve
any pressure.
Quick-disconnect fittings will not disconnect when under pressure.
It may be necessary to remove distribution valve from its mounting to gain access to the quick-
disconnect fittings.
AUTOLUBE TUBE INSTALLATION
1.
Install tube (2) into quick-disconnect fitting (1).
2.
Pull tubing (2) to ensure tube has locked in place.
1
2
434-40054
0141 00-2
