TM 10-3930-675-24-2
AUTOLUBE SYSTEM MAINTENANCE - CONTINUED
0141 00
AUTOLUBE DISTRIBUTION VALVE REMOVAL
NOTE
Tag each tube on the distribution valve with the number of the port to which it is connected.
Disconnect nine tubes (16) from nine quick-disconnect fittings (17) (Refer to Autolube Tubing Removal).
1.
2.
Remove two mounting bolts (18), locknuts (19), and remove distribution valve (20) from vehicle. Discard locknuts.
3.
Remove nine fittings (21) and O-rings (22) from distribution valve (20) and set fittings aside for reuse. Discard O-rings.
17
16
18,19
(HIDDEN)
21,22 (HIDDEN)
20
434-40056
AUTOLUBE DISTRIBUTION VALVE INSTALLATION
1.
Install nine new O-rings (22) on fittings (21) and install fittings on distribution valve (20).
2.
Mount distribution valve (20) on frame and secure with two new locknuts (19) and mounting bolts (18).
Connect nine tubes (16) to nine quick-disconnect fittings (17) (refer to Autolube Tubing Installation).
3.
4.
Initiate a manual lubrication cycle to ensure system is working properly (WP 0050 00).
END OF WORK PACKAGE
0141 00-4