TM 10-3930-675-24-2
ENGINE ASSEMBLY REPLACEMENT - CONTINUED
0197 00
REMOVAL - CONTINUED
NOTE
Tag transmission coolant lines to ensure correct installation.
7.
Loosen hose clamp (24) and disconnect coolant inlet hose (23) from transmission oil cooler (22).
8.
Loosen hose clamp (24) and disconnect coolant outlet hose (25) from transmission oil cooler (22).
NOTE
When removing transmission oil cooler for access, it is not necessary to disconnect oil hoses from
transmission oil cooler.
9.
Remove hose clamps, screws, washers, and nuts as needed to release transmission oil hoses.
10.
Disconnect hydraulic hose (18).
11.
Remove three screws (19) and washers (20) securing transmission oil cooler bracket (21) to flywheel housing (17).
12.
With assistance, remove transmission oil cooler (22) with hoses attached from flywheel housing (17). Position transmis-
sion oil cooler and hoses free of engine lift area.
19,20
21
18
17
22
23
24
25
24
NOTE
When removing transmission oil filters and bracket for access, it is not necessary to disconnect trans-
mission oil hoses from filters.
13.
Remove two screws (26) and washers (27) securing transmission oil filter bracket (28) to flywheel housing (17).
14.
Remove transmission oil filters (29) and bracket (28) from flywheel housing (17). Position free of engine lift area.
0197 00-4