TM 10-3930-675-24-2
ENGINE ASSEMBLY REPLACEMENT - CONTINUED
0197 00
REMOVAL - CONTINUED
21.
Disconnect front engine mounts from engine and frame. Move front engine mounts forward to gain access to remove
engine (WP 0198 00).
NOTE
Damper plates and torque converter should remain with engine during engine removal.
It may be necessary to tap on transmission-to-engine connection point with plastic-faced hammer
to break seal between two units.
22.
Carefully separate engine from transmission and lift engine from vehicle.
NOTE
If replacement engine is being installed, inspect removed engine for components to be removed and
transferred to replacement engine.
23.
Secure engine on suitable stand or in container.
24.
Remove two screws (39), cover (40), and gasket (38) from flywheel-to-damper plate mounting screw access.
38
39
40
0197 00-8
