TM 10-3930-675-24-2
ENGINE ASSEMBLY REPLACEMENT - CONTINUED
0197 00
INSTALLATION - CONTINUED
11.
Install cover (40) and new gasket (38) with two screws (39) over flywheel-to-damper plate screw access.
38
39
40
12.
Apply gasket forming compound to mounting surface and install four screws (36) to secure right rear engine and trans-
mission mounting bracket (35) to flywheel housing (17). Tighten screws to 116 lb-ft (157 Nm).
36
35
17
0197 00-12
