TM 10-3930-675-24-2
ENGINE ASSEMBLY REPLACEMENT - CONTINUED
0197 00
INSTALLATION - CONTINUED
17.
Install cooling fan hydraulic pump on drive adapter of engine (WP 0247 00).
18.
Apply gasket forming compound to mounting surface on flywheel housing (17) and install three screws (19) and wash-
ers (20) to secure transmission oil cooler bracket (21) with oil cooler (22) and transmission oil hoses. Tighten screws to
116 lb-ft (157 Nm).
19.
Connect hydraulic hose (18).
20.
Install hose clamps, screws, washers, and nuts as necessary to secure transmission oil hoses.
21.
Install coolant inlet hose (23) and coolant hose outlet (25) on transmission oil cooler (22) and secure with hose clamps
(24).
19,20
21
18
17
22
23
24
25
24
22.
Install transmission vent hose (16), hose clamp (15), screw (14), two washers (13), and new locknut (12) on bracket
(11).
12,13,14
15
16
11
0197 00-14
