TM 10-3930-675-24-2
ENGINE ASSEMBLY REPLACEMENT - CONTINUED
0197 00
INSTALLATION - CONTINUED
23.
Position A/C compressor (4) with refrigerant lines on engine mount bracket (10) and secure with screw (1), washer (2),
and nut (3).
24.
Position drive belt adjustment arm (8) and secure one end to engine mount bracket (9) and opposite end to A/C compres-
sor (4) with two screws (5), washers (6), and nuts (7).
4
1,2,3
5,6,7
8
10
5,6,7
9
25.
Install and adjust A/C compressor drive belt (WP 0195 00).
26.
Install ether cold start system (WP 0061 00).
27.
Connect electrical wiring harness and leads to starter (WP 0072 00).
28.
Connect electrical interface wiring harness to ECU (WP 0080 00).
29.
Install turbocharger (WP 0217 00).
30.
Connect exhaust system to turbocharger (WP 0063 00).
31.
Install air intake ducts (WP 0058 00).
32.
Connect coolant lines to engine (WP 0064 00 and WP 0065 00).
33.
Install transmission dipstick (WP 0117 00).
34.
Connect oil sampling supply hose to engine (WP 0055 00).
35.
Connect fuel supply and drain return hoses (WP 0060 00).
36.
Install alternator (WP 0070 00).
37.
Connect battery cables (WP 0110 00).
38.
Check and fill all fluids (fuel, coolant, engine oil, transmission oil) to proper level (WP 0050 00).
0197 00-15
