TM 10-3930-675-24-2
ENGINE ASSEMBLY REPLACEMENT - CONTINUED
0197 00
INSTALLATION - CONTINUED
13.
Apply gasket forming compound to mounting surface and install four screws (36) to secure left rear engine and trans-
mission mounting bracket (37) to flywheel housing (17). Tighten screws to 116 lb-ft (157 Nm).
17
36
36
37
14.
Install front engine mounts on frame and engine (WP 0198 00).
15.
Release tension on engine lifting fixture chains and disconnect lifting device and lifting fixture from engine lifting
brackets.
16.
Apply gasket forming compound to mounting surface on flywheel housing (17) and install two screws (26) and washers
(27) to secure transmission oil filter bracket (28) with transmission oil filters (29) and hoses in place. Tighten screws to
116 lb-ft (157 Nm).
26,27
17
28
29
0197 00-13
