TM 10-3930-675-24-2
ENGINE MOUNTS AND LIFTING BRACKETS REPLACEMENT - CONTINUED
0198 00
FRONT ENGINE MOUNT INSTALLATION - CONTINUED
7.
Install engine cover (WP 0148 00).
REAR ENGINE MOUNT REMOVAL
CAUTION
Position trestle under rear of engine to assist with supporting weight while rear engine mount is not in
place. DO NOT, however, position trestle under oil pan. Damage to oil pan may result.
1.
Position suitable lifting device and attach to engine lifting brackets.
NOTE
Left- and right-rear engine shock mounts are removed in the same manner.
2.
Loosen two jamnuts (14) and adjusting screws (13).
NOTE
Adjust lifting device to support weight of engine without applying tension on mounting hardware.
3.
Remove four screws (20) and washers (21) to disconnect rear support bracket (19) from engine.
4.
Remove two screws (22) and washers (23) to disconnect rear support bracket (19) from transmission.
5.
Remove screw (10) and washer (11) securing rear support bracket (19) to shock mount (12).
6.
With assistance, lift rear support bracket (19) from installed location.
7.
Remove two nuts (18), four washers (16 and 17), two screws (15), and shock mount (12).
19
10,11
20,21
12
14
20,21
13
22,23
14 13
15,16,17,18
3 MM
REAR
0198 00-4
