TM 10-3930-675-24-2
REAR MAIN OIL SEAL REPLACEMENT - CONTINUED
0202 00
INSTALLATION - CONTINUED
3.
Install 12 screws (3) hand tight.
4.
Tighten screws (3) in a star pattern to 60 lb-in. (7 Nm). Retighten screws in star pattern to 180 lb-in. (20 Nm).
3
434-40033
NOTE
Ensure dust seal is oriented with larger diameter facing toward engine.
5.
Apply a light coat of lubricating oil to inside diameter of new dust seal (4) and install dust seal on crankshaft (5).
6.
Push dust seal (4) back by hand until entire dust seal contacts oil seal case.
4
5
7.
Install flywheel assembly (WP 0204 00).
END OF WORK PACKAGE
0202 00-3/(0202 00-4 Blank)
