TM 10-3930-675-24-2
VIBRATION DAMPER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Inspection, Installation
INITIAL SETUP
Materials/Parts
Maintenance Level
Direct Support
Oil, Lubricating, OE/HDO 15/40 (Item 27, WP
Tools and Special Tools
Rag, Wiping (Item 30, WP 0290 00)
Tool Kit, General Mechanic's (Item 128, WP 0289
References
Barring Tool, Engine (Item 7, WP 0289 00)
TM 10-3930-675-10
Indicator, Dial (Item 58, WP 0289 00)
Equipment Condition
Pin Kit, Guide (Item 77, WP 0289 00)
Wrench, Torque (Item 145, WP 0289 00)
Engine cover removed (WP 0148 00)
REMOVAL
1.
Remove two screws (1) from clamping plate (3). Install guide studs (2) in holes.
2.
Remove three remaining screws (1) and replace with guide studs (2).
CAUTION
DO NOT use hammer or screwdriver to remove vibration damper. These tools can damage vibration damper.
3.
Remove clamping plate (3), crankshaft pulley (5), and vibration damper (4) from engine.
3
4
5
2
1
3
