TM 10-3930-675-24-2
VIBRATION DAMPER REPLACEMENT - CONTINUED
0203 00
INSTALLATION
NOTE
Ensure mounting surface of crankshaft is clean and free of dirt.
1.
Position vibration damper (4) over guide studs (2) and slide in place.
NOTE
Ensure mounting screw threads are lubricated with clean oil prior to installation.
2.
Install clamping plate (3) and crankshaft pulley (5). Remove three guide studs (2) and install screws (1) hand tight.
3.
Remove two guide studs (2) and install remaining screws (1). Tighten all screws in a star pattern to 150 lb-ft (203 Nm).
3
4
5
2
1
3
4.
Start engine (TM 10-3930-675-10) and check operation.
5.
Install engine cover (WP 0148 00).
END OF WORK PACKAGE
0203 00-4
