TM 10-3930-675-24-2
FLYWHEEL ASSEMBLY REPLACEMENT - CONTINUED
0204 00
INSTALLATION
NOTE
Ensure flywheel mounting surface and crankshaft is free of dirt.
1.
Install guide pin (2).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this warning
may result in death or injury to personnel.
Flywheel weighs 50 lb (23 kg) or more. Use suitable lifting device or assistance to lift flywheel.
2.
Using nylon sling, T-handles, and suitable lifting device, position flywheel (4) on guide pin (2).
2
4
0204 00-5
