TM 10-3930-675-24-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0205 00
INSTALLATION - CONTINUED
NOTE
Ensure flywheel housing mounting surface and cylinder block surface has been cleaned and all old
sealant removed.
2.
Install flywheel alignment plate (6) on oil pan mounting flange (7) and secure with four oil pan screws (5). Tighten
screws to 35 lb-ft (47 Nm).
5
6
5
7
3.
Apply bead of silicone sealant to mounting surface on flywheel housing (3) and cylinder block (4).
4.
Install two guide pins (1) in cylinder block (4).
1
3
4
0205 00-4
