TM 10-3930-675-24-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0205 00
ALIGNMENT - CONTINUED
12
7
13
4.
Using tightening sequence pattern shown, fully tighten 12 screws in three steps as follows:
a.
In first sequence, tighten screws to 50 lb-ft (68 Nm).
b.
In second sequence, tighten screws to 95 lb-ft (129 Nm).
c.
In third sequence, tighten screws to 145 lb-ft (197 Nm).
12
11
2
1
5
8
7
6
4
3
9
10
TIGHTENING SEQUENCE
5.
Recheck bore and face alignment measurements. If measurements are within specification, remove measurement tools
and engine barring tool.
6.
Install new rear main oil seal (WP 0202 00).
7.
Install flywheel assembly (WP 0204 00).
0205 00-9
