TM 10-3930-675-24-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0205 00
ALIGNMENT - CONTINUED
10
8,9
11
d.
Compare recorded reading to Table 2 for SAE number of flywheel housing being installed. If maximum bore
alignment does not meet specification, use a plastic-faced hammer to adjust position of flywheel housing.
Table 2. Flywheel Housing Bore Alignment Maximum TIR.
MM
SAE NO.
IN.
0.31
00
0.012
0.25
0
0.010
0.25
0.010
0.20
1
0.008
0.20
2
0.008
0.20
3
0.008
e.
Repeat bore alignment check steps a thru d until recorded reading is within specifications. If flywheel housing can-
not be aligned, it must be replaced.
0205 00-7