TM 10-3930-675-24-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0205 00
REMOVAL
1.
2.
Remove two screws (2) from positions "A" and "B" and install guide pins (1).
A
1
2
2
B
1
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in
death or injury to personnel.
NOTE
Flywheel housing weighs 50 lb (23 kg) or more. Use sling and lifting device to support and remove fly-
wheel housing.
3.
Remove 12 screws (2) securing flywheel housing (3) to cylinder block (4).
4.
Use a plastic-faced hammer, if needed, to loosen flywheel housing (3). With assistance, remove flywheel housing.
0205 00-2