TM 10-3930-675-24-2
ACCESSORY DRIVE ASSEMBLY MAINTENANCE - CONTINUED
0213 00
ASSEMBLY - CONTINUED
NOTE
Ensure end of drive shaft is supported.
9.
Install accessory drive assembly (9) in press with drive gear facing down.
10.
Apply a coating of clean lubricating oil to bore of hub coupling (14) and press hub coupling onto shaft.
14
9
11.
Install washer (13) and retaining screw (12) on shaft. Tighten screw to 35 lb-ft (47 Nm).
12
13
0213 00-12
