TM 10-3930-675-24-2
ACCESSORY DRIVE ASSEMBLY MAINTENANCE - CONTINUED
0213 00
INSTALLATION - CONTINUED
NOTE
Ensure timing marks on pulley face out.
6.
Align keyway in water pump pulley (3) with dowel pin in driveshaft and install pulley, tapping with hammer on drive-
shaft until securing bolts can be started to pull pulley in place.
7.
Secure water pump pulley (3) with retaining screw (2). Tighten screw to 400 lb-ft (542 Nm).
8.
Install plug (1) in inspection hole on gear cover.
KEYWAY
1
2
DOWEL PIN
3
9.
10.
11.
Operate engine (TM 10-3930-675-10) and check for fuel and oil leaks.
12.
END OF WORK PACKAGE
0213 00-15/(0213 00-16 Blank)