TM 10-3930-675-24-2
REAR AXLE ASSEMBLY REPLACEMENT - CONTINUED
0228 00
REMOVAL - CONTINUED
NOTE
Raise or lower rear axle slightly, as necessary, for ease in shaft removal.
10.
Remove shaft (6) holding rear axle (8) to crossmembers (1 and 11). Remove O-ring (2) and grease fitting (3) from shaft
flange. Discard O-ring.
11.
Lower rear axle (8) to clear frame (7) and move rear axle away from vehicle. Place axle on wood blocks or trestles.
Remove rigging.
3
4
2
5
1
6
7
14
8
9
12,13
10
11
INSTALLATION
Assemble rigging on rear axle (8). Refer to Rear Axle Rigging diagram. Attach rigging to suitable lifting device.
1.
2.
Position rear axle (8) on vehicle.
3.
Apply antiseize compound to shaft (6) bearing surface.
4.
Install grease fitting (3) and new O-ring (2) on shaft (6) flange.
0228 00-3
