TM 10-3930-675-24-2
REAR AXLE ASSEMBLY REPLACEMENT - CONTINUED
0228 00
INSTALLATION - CONTINUED
NOTE
Adjust position of rear axle slightly to ensure accurate alignment of rear axle with crossmembers.
5.
Install shaft (6) through crossmembers (1 and 11) and rear axle (8).
6.
At front of rear axle (8), install grease fitting (10) and new O-ring (9) on cover (14). Install cover on crossmember (11)
with 12 washers (13) and screws (12).
7.
At rear of rear axle (8), install shaft (6) flange on crossmember (1) with 12 washers (5) and screws (4).
8.
Install two rear wheel and tire assemblies (WP 0232 00).
9.
Remove rigging from rear axle.
10.
Position and raise two hydraulic jacks to support vehicle frame (7) and remove trestles or wood blocks.
11.
Lower and remove hydraulic jacks from under frame (7).
3
4
2
5
1
6
7
14
8
9
12,13
10
11
0228 00-4
