TM 10-3930-675-24-2
PARKING BRAKE CYLINDER MAINTENANCE - CONTINUED
0229 00
PARKING BRAKE CYLINDER INSTALLATION
1.
Support parking brake cylinder (2) on vehicle with nonelectrical wire and connect hydraulic hose (11) to fitting (10).
2.
Install parking brake cylinder (2) on rotor (12) and parking brake bracket (1) with one of two bolts (15) and one of two
castle nuts (13). Remove nonelectrical wire.
3.
Install new cotter pin (14) in one of two castle nuts (13).
4.
5.
Start engine (TM 10-3930-675-10) to provide hydraulic pressure.
WARNING
Wear eye protection when opening bleeder valve to avoid eye injury.
6.
Open bleeder valve (3) slowly until air and a small quantity of hydraulic oil is expelled. Close bleeder valve.
2
1
3
15
14
13
12
10
11
0229 00-6