TM 10-3930-675-24-2
BOOM FOLDING CYLINDER REPLACEMENT - CONTINUED
0253 00
REMOVAL - CONTINUED
5
6
1,2,3,4
7
6
8
1,2,3,4
5
INSTALLATION
WARNING
Boom folding cylinder weighs 132 lb (60 kg). Lifting device must have sufficient capacity to lift cylin-
der. Failure to follow this warning may result in death or injury to personnel.
NOTE
Refer to General Maintenance Instructions in WP 0284 00 for complete instructions on connecting
hydraulic hoses and applying proper torque.
1.
Using nylon sling and suitable lifting device, align cylinder (8) to vehicle.
2.
Lubricate two O-rings (5) with lubricating oil.
3.
Position two O-rings (5) on cylinder (8) end.
4.
Install grease fitting (4) on pin (3) and install pin.
5.
Install washer (2) and screw (1).
6.
Repeat steps 1 thru 5 for opposite end of cylinder (8).
7.
Connect two hydraulic hoses (6) to cylinder (8).
8.
Install hose clamp (7) on hydraulic hose (6) and cylinder (8).
0253 00-3