TM 10-3930-675-24-2
TOPHANDLER LEVELING CYLINDER REPLACEMENT - CONTINUED
0257 00
INSTALLATION
WARNING
Tophandler leveling cylinder weighs 97 lb (44 kg). Lifting device must have sufficient capacity to lift
cylinder. Failure to follow this warning may result in death or injury to personnel.
NOTE
Refer to General Maintenance Instructions in WP 0284 00 for complete instructions on connecting
hydraulic hoses and applying proper torque.
1.
Using a suitable lifting device and nylon sling, align cylinder (4) to tophandler.
2.
Install pin (1) and lockring (3).
3.
Repeat step 2 at opposite end of cylinder (4).
4.
Connect two hydraulic hoses (2) to cylinder (4).
5.
Install hose clamp (5) on hydraulic hose (2) and cylinder (4).
6.
Check oil level in hydraulic reservoir (WP 0050 00).
7.
Start engine (TM 10-3930-675-10), operate leveling cylinders, and check for leaks.
8.
Recheck oil level in hydraulic reservoir (WP 0050 00).
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0257 00-3/(0257 00-4 Blank)
